Paging Serial Receiver PSR3000
Paging Serial Receiver PSR3000 is a powerful and low cost paging receiver/decoder with a single serial data or TTL output.
Paging Serial Receiver can be used for:
- Remote Control
- LED Sign Control
- Broadcast Services
- Machinery switching and control
- Load shedding
- Remote telemetry control
- Plant Monitoring/Control
- Warning systems
PSR3000 – Paging Serial Receiver
PSR3000 – Paging Serial Receiver has an M16 processor, which provides a significant amount of data processing capability.
It can be used for a wide range of data control applications such as message logging, remote control, LED sign control, load shedding etc.
PSR3000 has 2 relay outputs and 2 digital control outputs and may be interfaced with the RCM3000 Relay Control Board for multiple relay output.
Paging Serial Receiver PSR3000 is designed to be supplied as an OEM device to allow other manufacturers to “paging enable” their own equipment or systems.
- Synthesized receivers available for most paging bands (VHF, UHF, 900MHz)
- Pocsag and Flex™ versions available
- Serial data port
- External antenna on BNC connector
- Power requirements 9-15 volt DC
- Very large capcode capacity
- Physical 104 x 57 x 14 mm
- Text search and replace
- Inbuilt pocsag encoder
- Custom software design for message data manipulation and control available on request.
|Protocols||Available in Pocsag and Flex|
|Outputs (opt)||1 serial port, 2 Relays, 2 digital alarm inputs (Opt)|
|Frequencies||134-139, 148-174, 408-412, 450-470, 929-932 MHz|
|Channel Spacing||25 KHz (12.5kHz optional)|
|Data rate||512-2400 pocsag, 1600/2 -6400/4 Flex|
|Freq. Deviation||+/- 4,5 KHz|
|Rx Sensitivity||5 uV at 1200 bps|
|Selectivity||better than 60 dB|
|Image Rejection||better than 55 dB|
|Spurious Rejection||better than 55 dB|
|Frequency Stability||10 ppm at -10C~+60C|
|Antenna||50 Ohm BNC (VHF & UHF), SMA (900MHz)|
|Power||10-32VDC (12VDC nominal)|
|Physical||104 x 57 x 14 (mm)|
|Operating Temp.||-10 -+70degC
|Relays||Rated 1A @ 12VDC|
PSR3000 - Paging Serial Receiver
|PDT3P User Guide||3000|| Paging Data Terminal 3000 Programming (PDT3P) |
software is used to set up configurations for
Paging Data Terminal 3000 (PDT3000), Paging Data Receiver (PDR3000) and
Paging Serial Receiver 3000 (PSR3000).
|591.93 kb||Download Preview|
|PSR3000 Product Sheet||3000|| Paging Serial Receiver PSR3000 general description, |
applications, features, specifications,
options and accessories.
|53.15 kb||Download Preview|